Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
STORAGE:
Do not store the dryer in any area that it can be exposed to outdoor weather or cold
temperatures.
For long term storage, or if dryer will not be used for a long period of time,
disconnect the power supply. Clean inside of the unit and keep door open until dried
thoroughly. Clean all filters and empty lint traps.
INSTALLATION
INSTALLATION WARNINGS AND PRECAUTIONS
1.
Plug the power cord into an AC 240 volt 60Hz wall socket rated at 30 amps or
higher. Use the socket for this dryer unit only.
2.
Do not use an extension cord.
- Sharing a wall socket with another appliance, using a power strip, or extending
the power cord may result in electric shock or fire.
- Do not use an electric transformer. It may result in electric shock or fire.
- Ensure that the power voltage, frequency, and current match the product's
specifications. Failing to do so may result in electric shock or fire.
3.
Have this appliance installed by a qualified technician or service company.
- Failing to do so may result in electric shock, fire, explosion, problems with the
product, or injury.
4.
Remove all foreign substances such as dust or water from the power plug
terminals and contact points using a dry cloth on a regular basis.
- Unplug the power plug and clean it with a dry cloth.
- Failing to do so may result in electric shock or fire.
5.
Plug the power cord into the wall socket in the correct orientation so the prongs
align with the slots in the receptacle.
- If you attempt to plug the power plug into the socket incorrectly, the electric
wires within the cable may be damaged and this may result in electric shock or
fire.
6.
Plug the power plug into the wall socket firmly. Do not use a damaged power
plug, or loosen wall socket.
- This may result in electric shock or fire.
7.
Do not pull or excessively bend the power cord.
8.
Do not twist or tie the power cord.
9.
Do not hook the power cord over a metal object, place a heavy object on the
power cord, insert the power cord between objects, or push the power cord into
the space behind the appliance.
- This may result in electric shock or fire.
10. Do not pull the power cord when unplugging the power plug.
- Unplug the power plug by holding the plug.
- Failing to do so may result in electric shock or fire.
11.
If the power plug or power cord are damaged, contact your nearest service
center.
12.
Do not install this appliance near a heater or inflammable material.
13.
Do not install this appliance in a humid, oily, or dusty location, or in a location
exposed to direct sunlight or water (rain drops).
Page 15
Publicidad
