Publicidad
GB
English
Override instruction to open
the security box
We have engineered a manual override
system for your security box. If you forget or
misplace your combination,
– push the small plastic cover (5) (see
► p. 4, fig. 1) on the front panel
upwards or downwards,
– insert the key into the keyhole and turn
it clockwise direction,
– turn the knob (1) (see ► p. 4, fig. 1)
clockwise. This will manually open the
security box at any time.
The override key can also be used when
batteries are low and fully discharged.
Technical data
Power supply
Dimensions
• Outside
• Inside
Wall thickness
• Casing
• Door
Volume
Weight
Disposal
The packaging is made of environ-
mentally friendly materials which
you can dispose of at local recy-
cling centres.
Options for the disposal of the
worn-out product can be obtained
from your municipality or city
administration.
49
Fixation of the security box
To reduce the risk of theft of the security
box, it is highly recommended to anchor the
security box to the floor, wall or in a cup-
board. For your convenience, there are
holes (diameter 11mm) both in the bottom
and on the back. It can be fixed by using for
example, appropriate expansion bolts (M6/
M8) depending on the material the security
box is being anchored onto. Please fix the
security box correctly according ► p. 4,
fig. 3.
The security box should be placed in a lev-
elled horizontal position when installed.
BE-1 LED
Security Box
4× AA, R6, 1,5 V
230×350×250 mm
226×346×195 mm
2 mm
4 mm
15 L
10 kg
Batteries and rechargeable batter-
ies that are no longer needed do
not belong in the household waste,
but must be disposed of properly.
– Take any unusable batteries and
– Do not burn batteries. Risk of explosion!
BE-2 LED
Security Box
4× AA, R6, 1,5 V
300×420×350 mm
296×416×295 mm
2 mm
4 mm
36 L
16 kg
rechargeable batteries to the dealer or
community battery collection point.
BE-3 LED
Security Box
4× AA, R6, 1,5 V
500×350×350 mm
496×346×295 mm
2 mm
4 mm
51 L
20 kg
Publicidad
