EN
CONTROL PANEL
Controls
•
To start the dehydrator, press
dehydrator, press START/STOP.
•
To change the temperature, press
•
To change the time, press
Sounds
•
To turn sounds on/off, wait for the display to show "00:00", then press and hold
seconds until the dehydrator beeps 1 time.
BEFORE FIRST USE
Setting Up
1. Remove all packaging from your
dehydrator and its accessories. Make
sure all package contents are included
(see page 4).
2. Clean the base and trays with a
moistened cloth.
Note: The trays can be washed in the top rack
of a dishwasher only if you remove them before
the drying cycle starts. Do not wash the base in a
dishwasher. Do not immerse the base in water.
8
TEMP/TIME
once, then press START/STOP. To stop the
TEMP/TIME
TEMP/TIME
a second time, then press
Hours
Minutes
+
once, then press
or
+
or
3. Place the dehydrator base on a solid,
level surface. Plug in. Stack the drying
trays on top of the base.
4. Run the dehydrator for 30 minutes
at 75°C, without adding any food.
Make sure that the room has sufficient
ventilation, in case the dehydrator
produces any smoke or smells. This is
normal.
5. Rinse the trays in water. Dry all parts.
Note: You only need to do this the first time you use
the dehydrator.
–
–
+
for 5