Publicidad
Idiomas disponibles
Idiomas disponibles
Audio source selection
You have the possibility to connecting a maximum of 2 audio sources to
the transmitter, for example an analogue stereo system and a digital TV
set. Use the "Analog/Digital" input selection switch on the left side of the
receiver to select the desired audio source.
Adjusting the volume
Use the silver volume control on the front of the receiver to easily adjust the
desired volume by turning it. The LED bar indicates the set volume. A low
level of volume is indicated when only a few LEDs on the volume indicator
bar are lit. The more LEDs on the volume indicator light up, the higher the
set volume.
Adjusting the balance
The balance control allows the volume distribution between the right and
left ear. Adjust the balance so that you hear equally well in both ears.
The balance control is located on the rear side of the receiver and can be
turned with the help of a coin.
English 15
Publicidad
