Farfisa 1SEPG+ Manual De Instrucciones página 13

then go to "Manager". As in the following
pictures, a ONVIF IP camera (H264, H265,
maximum resolution 1080p) can be added,
with automatic or manual search, which can
be displayed both on the monitor screen and
from the VDP Connect app.
forwarding the call to the smart pho-
ne.
To set up call forwarding to the smart pho-
ne, follow the steps below:
Connecting the monitor to the wi-fi.
1. in stand-by touch the screen anywhe-
re. The Home page will be displayed.
Press, the wi-fi icon;
2. the list of available wi-fi networks will
be displayed. Select that one you want
to connect. Enter the password and
wait for the monitor to connect.
Downloading VDP Connect app.
1. Scan the QR codes below and download
the VDP Connect app to your smartpho-
ne:
iOS Android
2. grant the app the required permissions
and then press the scan icon:
3. scan the QR code that will be displayed
on the monitor as described below:
Note: in iOS mobile phones the 'Call-
Kit' option of VDP Connect must be en-
abled.
Connecting the monitor to the smart
phone.
1. With the monitor in standby, touch the
screen anywhere. The Home page will
be displayed;
2. touch the "Setting" icon;
3. on the left side there are the four op-
tions of possible settings, tap on the
fourth option "Manager" and then press
"SIP config.".
4. on the next page, press "Use default"
and then touch the QR code at the bot-
tom of the screen;
5. the QR code will be displayed enlarged
and must be scanned by the "VDP Con-
nect" app previously installed on your
smart phone.
Receiving a call on your smart pho-
ne.
It is immediately possible to view images
from the external door station camera on
your smart phone.
Receiving of the mobile call will only
take place after call forwarding has
been activated (see section "Call
Forwarding").
Mi 2582 - 13 -