Descargar Imprimir esta página

King Innovation KING CM Manual De Instrucciones página 14

Publicidad

INSTRUCTION MANUAL
6-5 Resistance Measurement:
Turn the dial to the
lead to the "+" terminal and the black lead to the "COM"
terminal. Place the red and black test leads at both the
positive and negative points to be measured. The display
will show the resistance value of the measurement being
taken on the display.
NOTE:
When measuring resistance, the circuit should be powered
off and all capacitors should be completely discharged
prior to testing.
I
14
KING INNOVATION
Ω range. Connect the red test

Publicidad

loading

Este manual también es adecuado para:

42095