15. Accessible surface temperatures can be high when the appliance is operating.
Never touch the hot surfaces of the appliance
16. Due to the high temperature, special care should be taken when taking out the prepared
dishes, removing hot fat or other hot food remnants. Hot steam may come out of the
appliance.
17. The device has a heating function. The device should be used with care. Only touch
surfaces intended for this purpose. Use protective clothing (oven mitts, etc.)
18. After finishing work, wait until the device cools down before putting it into the packaging.
19. It is not allowed to put cardboard, paper, plastic, and other flammable and fusible
products on the device.
20. The appliance is not intended to be operated with external timers or a separate remote
control system.
21. The power cord must not be placed over the device, and it must not touch or lie near hot
surfaces. Do not place the device under a power socket.
22. Do not move or carry the device during operation. After finishing work, they can be
moved only after they have cooled down.
23. Before and during use, make sure that the power cord is not stretched over an open fire
or other heat source and over sharp edges that may damage the cable insulation.
25. All packaging materials should be removed before the first use. Attention! In the case of
housing with metal elements, an invisible protective foil may be stretched over these
elements, which must also be removed.
26. NEVER cover the device during operation or when it is not completely cool, remember
that the heating elements of the device take time to cool down completely.
27. BE CAREFUL if you use the device on surfaces sensitive to high temperatures. It is then
recommended to use insulating pads
AD3058 Crepe maker, also for tortillas, apple pancakes, potato pancakes.
DESCRIPTION OF DEVICE
1. Heating plate
2. Power indicator (red)
3. Ready indicator (green)
4. Temperature control knob
5. Housing
6. Cord storage system
7. Accessories for spreading the dough and turning pancakes
BEFORE FIRST USE
1. Remove all cartons and labels from the device.
2. Wipe the heating plate first with damp and next with a dry cloth.
3. Apply a bit of edible oil or other plant fat onto the heating plate, connect the device to a grounded power socket, the power indicator
lamp will light up (2). Set the thermostat knob (4) on MAX, the ready indicator will light up (3).
4. Keep the appliance running for a few minutes to get rid of the manufacturing odor.
The device could emit some smoke during this time. That's normal.
5. Clean unit according to the "Cleaning" part of manual
USING DEVICE
4