Descargar Imprimir esta página

WERKU WK401210 Manual De Instrucciones página 2

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
ENG
CE DECLARATION CONFORMITY.
declares that the WK401210 paint spray
Werku
®
gun is in accordance with the European Directives
and Standards 2014/30/EU,
CE, EN60745-1:2009+A11, EN50580:2012,
EN55014-1:2006+A1+A2, EN55014-
2:1997+A1+A2, EN61000-3-2:2014 and EN61000-
3-3:2013.
La Coruña, 10/01/2017
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Voltage-frequency 230V~50Hz
Class II
Protection index IP20
pressure 140 bar
Nozzle diameter 1.8 / 2.6 mm
Maximum viscosity 80 din/sec
800 ml
Pulverization 330 / 800 ml/min
length 1.8 m
Acoustic pressure LpA <77.57
dB(A)
Respective uncertainity KpA 3 dB(A)
Acoustic pressure LwA <88.57 dB(A)
uncertainity KwA 3 dB(A)
Respective uncertainity Kh 1.5 m/s².
SAFETY INSTRUCTIONS.
Read all security warnings and all instructions
Failure to follow all warnings and instructions
listed below may result in electrical shock, fire
and/or serious injury
instructions for future reference
avoided in many cases by recognizing a potentially
hazardous situation before it occurs and by
observing appropriate safety procedures
use this paint spray gun for other applications than
those specified in this manual.
WORK AREA SAFETY.
Keep work area clean and well lit
dark areas invite accidents
in explosive atmospheres, such as in the presence of
flammable liquids, gases or dusts
children and curious while operating a power tool
Distractions can cause you to lose control.
PERSONAL SAFETY.
Stay alert, watch what you are doing and use
common sense when operating a power tool
Do not use a power tool while tired or under
the influence of drugs, alcohol or medicines
moment of inattention while operating power tools
may cause damage serious personal.
2006/42/CE,
2006/95/
Power 650W
Maximum
Cup capacity
Hose
Respective
Vibration Ah <2.5 m/s²
Keep all warnings and all
Accidents can be
Cluttered and
Do not handle power tools
Keep away from
USE PPE'S.
Use protection glasses according EN166
protection masks according EN149
the type of work, use other precise PPE.
DO NOT WORK ON TIPTOES.
Keep your feet on the ground and balance at all
times
tool in unexpected situations.
DRESS PROPERLY.
Do not wear loose clothing or jewelry
hair, clothing and gloves away from moving parts
Loose clothes, jewelry or long hair can be caught
in moving parts
means for extracting and collecting dust, make sure
they are connected and properly used
these devices can reduce dust related hazards.
ELECTRICAL SAFETY.
The plug of the power tool must match with the
base of the socket
way
Do not use any adapter plug with earthed
power tools
bases will reduce the risk of electric shock
body contact with grounded surfaces such as
pipes, radiators, cookers and refrigerators
is an increased risk of electric shock if your body
is grounded
wet conditions
increase the risk of electric shock.
DO NOT ABUSE THE CORD.
Never use the cord to carry, lift or unplug the
power tool
oil, sharp edges or moving parts
entangled cords increase the risk of electric shock
Do not
When operating a power tool outdoors, use an
extension cord suitable for outdoor use
an extension cord suitable for outdoor use reduces
the risk of electric shock
tool in a damp location is unavoidable, use a power
protected by a residual current device (RCD)
use of an RCD reduces the risk of electric shock.
AVOID ACCIDENTAL STARTING.
Make sure the switch is in "off" position before
connecting to the network, or when taking or
carrying the power tool
with your finger on the switch or plugging in
power tools that have the switch in "on" position
invites to accidents
A
before starting the power tool
attached to a rotating part of a power tool can
cause personal injury.
2
English
This enables better control of the power
If there are devices for connecting
Never modify the plug in any
Unmodified plugs and matching
Do not expose power tools to rain or
Water entering the power tool will
Keep the cord away from heat,
If the use of a power
Carrying power tools
Remove keys or tools
Use
If required by
Keep your
The use of
Avoid
There
Damaged or
The use of
The
A left key or tool

Publicidad

loading