Sauder North Avenue Serie Manual Del Usuario página 11

Step 7
å
Fasten the SUPPORT BRACKET (L) to the POST (N).
Tighten four 1/2" HEX HEAD SCREWS (6) and four
BARREL NUTS (2) using the L-WRENCH (4) on both the
HEX HEAD SCREW and the BARREL NUT.
å
NOTE: You should start each SCREW a few turns before
completely tightening any of them.
426016
2
N
www.sauder.com/service
L
If you're doing this to
help a friend, don't
leave without a bite.
4
6
1/2" HEX HEAD SCREW
(4 used in this step)
Page 11