Sauder Boulevard Cafe Serie Manual Del Usuario página 19

Step 14
å
Refer to the enlarged diagram to identify the parts on
the HINGES.
å
The DOORS may need some adjustments. Follow the text
below to make needed adjustments.
å
DOOR ADJUSTMENTS:
To adjust the DOORS from side to side (horizontal), turn the
adjusting screw in or out.
å
To adjust the DOORS up and down (vertical), remove the round
hole screws and loosen the slotted hole screws. Move the DOORS
up or down to the desired location. Tighten the slotted hole screws
first. Then turn the round holes screws into their holes.
å
To adjust the DOORS in or out (depth), loosen the mounting
screw one turn and move the DOORS in or out, as needed.
Tighten the mounting screw after making adjustments
å
Insert the SHELF PINS (5) into the hole locations of your
choice in the ENDS (D and E) and UPRIGHT (G). Set the
ADJUSTABLE SHELVES (F) onto the SHELF PINS.
Notch
427350
D
F
www.sauder.com/service
(vertical adjustment)
4 screws
G
F
17
Mounting screw (depth)
Adjusting screw (horizontal)
(8 used)
5
E
Page 19