Publicidad
Idiomas disponibles
Idiomas disponibles
Adjusting the Soundbar volume with a TV remote control
Adjust the Soundbar volume using the TV's remote control.
• This function can be used with IR remote controls only. Bluetooth remote controls (remote
controls that require pairing) are not supported.
• Set the TV speaker to External Speaker to use this function.
• Manufacturers supporting this function:
VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, Hisense, RCA
1. Turn Off the Soundbar.
2. Push up and hold the WOOFER button for 5 seconds.
Each time you push the WOOFER button up and hold it for 5 seconds, the mode switches in the
following order: "Off-TV Remote" (Default mode), "Samsung-TV Remote", "All-TV Remote".
The LED indicator status changes each time the mode is changed, as shown below.
Remote Control Button
5 Sec
5 Sec
5 Sec
LED Indicator
Red Blinks X1
"Off-TV Remote"
(Default mode)
Cyan Blinks X1
"Samsung-TV Remote"
Blue Blinks X1
"All-TV Remote"
ENG - 14
Status
Disable the TV remote control.
Enable a Samsung TV's IR remote
control.
Enable a third-party TV's IR remote
control.
Publicidad
