Parkside Performance PSSAP 2028 A1 Traduccion Del Manual De Instrucciones Originales página 51

CORDLESS SABRE SAW 20V
PSSAP 2028 A1
Introduction
Congratulations on the purchase of your new
appliance. You have chosen a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product,
please familiarise yourself with all operating and
safety instructions. Use the product only as
described and for the range of applications speci-
fied. Please also pass these operating instructions
on to any future owner.
Intended use
This appliance is designed for sawing, cutting to
length and adapting wood, plastics, metal and
construction materials. The sabre saw is suitable for
rough sawing work, straight and curved cuts and
cuts off surfaces flush. Heed the information
concerning saw blades and practical advice on
sawing. Any other uses of or modifications to the
machine are deemed to be improper usage and
may result in serious physical injury. The manufac-
turer accepts no responsibility for damage(s) attrib-
utable to misuse. This appliance is not intended for
commercial use.
GB │ MT
■ 44 │
Features
Saw blade
Footplate
Quick-release chuck
Pendulum stroke switch
Ventilation slits
Safety lock-out
ON/OFF switch
Handle
Battery charge level button
Battery display LED
Battery pack*
Release button for battery pack
Button for 1st and 2nd gear stage
Ready2Connect LED
13a
Red charge control LED
Green charge control LED
High-speed charger*
LED working light
Package contents
1 cordless sabre saw 20V
1 saw blade wood 152 x 1 mm
1 bi-metal saw blade 150 x 0.9 mm
1 carrying case
1 set of operating instructions
Technical data
Cordless sabre saw 20V PSSAP 2028 A1
Rated voltage
Rated idle stroke speed
Stroke length
Max. cutting performance
Sawblade mounting
20 V (DC)
n 0 –2300 /
0
n 0 –3000 rpm
0
28 mm
Wood 255 mm
20 mm (in non-
alloyed steel)
½" (12.7 mm)
PSSAP 2028 A1