Publicidad
Step
Step 16
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D24 and D25).
å
Fasten the EXTENISON SLIDES (U) to the DRAWER SIDES (D24 and D25).
å
Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
NOTE: The screw head in the CAM must be visible through the slotted hole
å
in the SLIDE.
Fasten the PULL (70K) to the DRAWER FRONT (K). Use two BLACK 7/8"
å
MACHINE SCREWS (37S).
2
3
BLACK 7/8" MACHINE SCREW
(2 used for the PULL)
www.sauder.com/services
Open end
1
U
D25
K
70K
37S
GOLD 5/16" FLAT HEAD SCREW
10A
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
D24
3S
(4 used in this step)
418705
10A
Open end
U
1
2
3
Page 21
Publicidad
