ARDES AR5T1001 Instrucciones Para El Uso página 15

18. Clean the battery contacts and also those of the equipment prior to
battery installation.
19. In case of leak from batteries, avoid any contact with it; in case of
contact, wash the affected part with water and seek medical attention.
(see image at last page)
1 - LED display / Remote control
2 - Air outlet
3 - Short feet
4 - Long feet
Caution! The fan should always be switched off and does not connected
to the mains supply, if you mounting the fan.
Caution! Connect to the mains supply only after the fan has been fully
assembled.
- The fan must not be used without the 4 feet
- The device may be operated only in straight and upright position
- This device may not be used in a horizontal position
INSTRUCTIONS FOR USE
Place the fan on a dry and stable surface and insert the plug on the
socket; the unit will emit a short "BIP" sound indicating that power is
supplied. The unit can be operated by using remote control included.
Remote control
D
E
B
ASSEMBLING
F
A
C
G
A. On/Off
B. Oscillation
C. Speed
D. Natural mode
E. Timer
F. Display
G. Indicator light
15