NORAUTO 2372772 Manual página 67

Read code
Press Up/Down button to select the read code from
1
diagnostic menu, and then press Return/Confirm button.
Processing
J1805VPW
J1805 PWM
IOS15765 - 4CAN(11bit)
• If multiple modules are detected, the system will prompt you to
select the module before testing.
Read Codes
Erase Codes
l/M Readiness
Data Stream
Freeze Frame
Voltage test
Vehicle Information
• Press Up/Down button to select a module, and then press
Return/Confirm button.
Current DTCs (¥03)
Pending DTCs (¥07)
Permanent DTCs (¥0A)
2 Read DTC and its definition on the screen.
Please input DTC
The 1st rang: P.C.B.U
The 2nd rang: P.C.B.U
The others from O to F
• Control module No., diagnostic code order, total numbers of
code to be detected and types of code (general or specified
by manufacturer, storage or code to be processed) will be
displayed on the upper right corner of screen.
lf find out multiple DTC. please press Up/Down button by the
3
requirements, until all codes are all displayed.
• If not detect the code. "Code is not stored in module!" information
is displayed on the screen.
• If the retrieved DTC contains any manufacturer-specific or
Diagnostic Menu
Diagnostic Menu
Read Codes
Review
P O O O O
EN
66