auna Elton Manual De Instrucciones página 33

GETTING STARTED
AC/DC Adaptor
Connect the one end of the detachable power cord to an AC socket at AC
adaptor and the other end to the AC outlet. The plug the DC plug (28) to the
unit DC-In socket (24).
Switch the POWER ON/OFF switch (25) at the back of the unit to ON
position.
When you first plug the unit into the mains, the unit will go into standby
mode. The Clock will show up and flashing with " 00: 00 ".

Press and hold / FUNCTION button (9) to turn on the unit. If the LCD
display (8) is on, it means the power supply is normal. Now the system is
ready to play the music.
Connect the provided FM wire to the Antenna socket (26) at the back of unit.
Speaker wire terminal
1. Loosen the tops by unscrewing through anti-clockwise direction.
2. Take out the tops and centre hole is available.
3. Insert the corresponding positive (+) speaker wire (red colour) into
the centre hole on the screw terminal with red stripe. And Insert the
corresponding negative (-) speaker wire (black colour) into the centre
hole on the screw terminal with black stripe
4. Put back the tops.
5. Turn the tops clockwise to tighten and hold the speaker wire in place.
EN
33