Publicidad
Idiomas disponibles
Idiomas disponibles
Basic Operation
Align the camera as follows:
Fasten the camera to a tree or similar object at a height of 1-2 meters
and align the camera in the desired direction. Then move slowly from
one side of the target area to the other side. While doing this, look at
the motion display.
If you see a blue light , you have been detected by one of the activated
side motion sensors. If you see a green light, you have been detected
by the front motion sensor. In this way, you can work out the best
alignment for the camera.
The motion display only lights up when the operating mode selector
switch is in the TEST position and one of the motion sensors has
detected movement. During normal operation, there will be no lights
on.
To ensure that the camera does not make unwanted recordings of
irrelevant movements, it should not be set up in a sunny location or
close to branches that can move in the wind.
For more product operations, please go to our
website(www.coolifeeu.com)
to view or directly scan the QR code
to view.
26
Publicidad
