Publicidad
Idiomas disponibles
Idiomas disponibles
Setup Menu and Functions
Target recording time
Select "On" if the camera should only be active during a certain period.
In the screen menu that subsequently appears, you can then set the start
and end time for the active phase.
The settings made here apply every day.
The camera will not record any images outside of the active period.
Time lapse
In Time lapse menu, there are three options as below.
[Normal]: The camera will take pictures automatically as per set time
interval. For example,set the interval time to 1 hour, the camera will
take a photo or video each hour(Confirmation according to your work
mode is taken photo or video). If you want to observe that a plant
blooms, the camera will take 24 photos in 24 hours to record the whole
process of blooming.
[TL Video]: You can set the interval time.The time range is from 1
second to 24 hours. For example, set the interval to 1 hour, the camera
will take a photo each hour. If the camera works for 24 hours,there will
be 24 photos. These photos will be converted into a video.
[Off]: Close the time lapse function.
Note:
1. The camera needs to take multiple pictures to form the playback file.
If the number of pictures taken is too small, the playback file cannot be
formed but is displayed in the form of pictures.
2. When you confirm "On" with the OK button, Time lapse mode
disables the PIR sensor(The camera does not automatically sense to
23
Publicidad
