Descargar Imprimir esta página

Silvercrest PD-8871 Instrucciones De Utilización Y De Seguridad página 38

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 163
Remove the batteries / recharge-
able batteries if the product will
not be used for an extended
period.
Risk of product damage
Only use the specified battery /
rechargeable battery type!
Insert the batteries / rechargeable
batteries according to the polar-
ity marking (+) and (-) on the
battery / rechargeable battery
and the product.
Clean the contacts on the bat-
tery / rechargeable battery and
in the battery compartment with
a dry, lint-free cloth or cotton bud
before inserting the batteries!
Remove drained batteries /
rechargeable batteries from
the product immediately.
Do not allow the connection
terminals to short circuit.
Before first use
Checking the product
and delivery contents
ATTENTION! RISK OF
DAMAGE! Opening the pack-
aging carelessly with a sharp knife
or other sharp objects could
quickly damage the product.
38 GB/IE
Be very careful when opening
the packaging.
Remove the product from the
packaging.
Check that the delivery contents
are complete (see fig. A).
Check to see if the product or
the individual parts are visibly
damaged. If this is the case, do
not use the product. Contact the
manufacturer via the service
address given in the chapter
"Service address".
Setting up the product
Set up the product on an easily
accessible, level, dry, heat-resist-
ant and stable surface to minimise
vibration and noise. The product
is fitted with castors
Do not roll the product over ob-
jects and, if necessary, protect
fragile floor coverings from
damage.
Note: The product must be lo-
cated near a properly installed
grounded power socket.
Make sure that the air inlets
and the air outlets
9
always free of obstructions.
Keep a minimum distance of 30 cm
between the product and any
obstacles.
.
4
/
5
/
are
3
7

Publicidad

loading