Publicidad
Idiomas disponibles
Idiomas disponibles
4. PARTS DESCRIPTION
1. Transformation clamp.
Receives the AC current flowing through the conductor.
2. Trigger
Press the lever to open the transformation clamp. Pressing the level with
one finger releases the clamp and closes it again.
3. Hz button / work
Press this button to select frequency (Hz) or duty cycle measurement in the
Hz position. If the knob is in the AC current position, you can measure
frequency.
4. Range Button
AC voltage / DC voltage, AC current and resistance measuring ranges can
be selected manually or automatically by pressing the range control
button. Press this button as follows to select the range control mode and
the required ranges.
Publicidad
