Publicidad
Idiomas disponibles
Idiomas disponibles
KITCHEN SCALE
10
VOLUME MEASURING
1.
Place the scale on a solid and flat surface.
2.
Press the
3.
Press MODE button to convert the mode to water or milk volume mode when LCD
shows "0".
4.
Put a container onto the scale platform, LCD shows the weight of the container.
5.
Press
6.
Pour liquid (water or milk) into the container, LCD will show the volume of the liquid.
MODE/UNIT TRANSFER
Press MODE button to switch the mode or unit you need after turning on the scale, it can be
switch circularly.
There is UNIT button on base of the scale for some models, in this case, you need to set the unit
with the UNIT button on base.
Note: The unit system of the scale depends on scale destination or the requirement of distributor.
ZERO & TARE FUNCTION
Consents to weigh different loads consecutively without removing loads from the scale. Put first
load on the scale, display will show the weight. Press the
"0" before adding next load. You can repeat this operation.
button to turn on the scale.
button for Zero or Tare.
Condition 1: "ZERO" function
When the total sum of all loads on the scale is less than or equal
to 4% of the scale's maximum weighing capacity:
LED will show ---- or "0g" each time
stable, please wait for a moment. If LCD shows "0g" and meanwhile an
icon with "o" means that the ZERO function is activated. The maximum
weighing capacity remains unchanged.
(For example: when capacity is 2000g, 4% is 80g; when capacity is
5000g, 4% is 200g).
button to reset the LCD reading to
is pressed. ---- means not
Publicidad
