Flyingvoice FIP16Plus Guía De Instalación Rápida página 3

About This Guide
For the first installation, please read this manual in advance. and configure it step by step asrequests.
You need reboot the device once you finish the configuration including change the networkenviron-
ments, account number,etc. If you need more info, please check our website:
download the user manual.
1 Packaging list
The following items are included in your package. If you find anything missing, please contact your service provider.
Handset
USB Charge Cradle Belt Clip
2 Connect the charge cradle and charge the handset
If you are using an external power source, Push the power card into the power supply, and plug the power
supply into the DC 5V supply hub on the back of the phone.
3 Starting the phone
www.flyingvoice.com
FIP16Plus IP Phone
FLYINGVOICE Network TECHNOLOGY CO., LTD
QC PASS
Quick Installation Guide
Guía de Instalación Rápida
Guide d'installation rapide
Guia Rápido de Instalação
Руководство по быстрой установке
www.flyingvoice.com 快速安装指南
USB QC Pass Installation Guide
- 1 -
After the IP phone is connected the supplied with power, it automatically begins the initialization
process. After setup, the LCD will display "Flyingvoice" logo and the phone is ready for use. You can
configure the phone via phone user interface or web interface.
and
www.flyingvoice.com
Note: If the phone does not show anyabove information on the screen, please check if you power
on the phone. Longpress the power button to power on thePhone. Or charge the phone for a
littletime, Then power on the phone.If it it still not work, try to change for along time. If it is still not
work, Please contact your phone Administrator or service provider.
Configuring the phone
4
4.1 Network setting
You can configure the network setting in the following ways.
DHCP:
By default, the phone attempts to contact a DHCP server in your network to obtains its valid
settings e.g., IP address, subnet mask, gateway address and DNS address.
Static IP Address: If the phone cannot contact a DHCP server for any reason, You need to configure
IP address, subnet mask, gateway address and DNS address for the phone manually.
4.2 Accessing the web management
Step1. Connect the phone to the local area network via Wi-Fi, connect your PC to the same network.
Step2. Open web browser on your PC, enter the IP address (find the IP address by pressing ▲>
Network) into the address bar, then press Enter key.
Step3. Enter the username (Default: admin) and password (Default: admin) in the login page and
click Confirm.
Power button
- 2-