Descargar Imprimir esta página

Worx WA3883 Manual De Instrucciones página 6

Ocultar thumbs Ver también para WA3883:

Publicidad

COMPONENT LIST
1.
BATTERY PACK*
2.
CHARGER
3.
CHARGE INDICATOR LIGHT
*Not all the accessories illustrated or described are
included in standard delivery.
We recommend that you purchase your accessories
listed in the above list from the same store that sold you
the battery charger. Refer to the accessory packaging for
further details. Store personnel can assist you and offer
advice.
TECHNICAL DATA
Rated input voltage
Rated input power
Charger output 1
Charger output 2
6
Charge battery
Charging time (approx.)
Battery pack:
2.0 Ah (1 pc)
2.0 Ah (2 pcs)
4.0 Ah(1 pc)
4.0 Ah(2 pcs)
6.0 Ah(1 pc)
6.0 Ah(2 pcs)
Protection class
Machine weight
** Charger output 1 and output 2 mean two ports with
the same output voltage and current.
For the technical data of the types, the number of cells
and the rated capacity of the batteries that can be
charged, please refer the nameplate of the battery pack
supplied by Worx.
Dual Port Battery Charger
CHARGING PROCEDURE
CHARGING INSTRUCTIONS
1. CHARGING YOUR BATTERY PACK
The charger is designed to charge one or two battery
packs at the same time.
not attempt to use any other devices. Never insert or
allow metallic objects into your charger or battery pack
connections because an electrical failure and hazard will
occur.
2. BEFORE USING YOUR CORDLESS TOOL
Your battery pack is UNCHARGED and you must charge
once before use.
3. HOW TO CHARGE YOUR BATTERY
CHARGING PROCEDURE
1)
100-240 V~50-60 Hz
2)
100 W
20 V d.c., 2 A **
20 V d.c., 2 A **
sunlight or heat, allow time for the battery to cool
Li-Ion
down before re-charging to achieve the full charge.
CHARGING INDICATOR
This charger is designed to detect some problems that
0.5 hr
can arise with battery packs. Indicator lights indicate
problems (see table below). If this occurs, insert a new
1 hr
battery pack to determine if the charger is OK. If the
new battery charges correctly, then the original pack is
1 hr
defective and should be returned to a service center or
recycling service center. If the new battery pack displays
2 hr
the same problem as the original Battery Pack, have the
charger tested at an authorized service center.
1.5 hr
3.0 hr
Red on
/II
0.95 kg
Red flash
NOTE: Before using the tool, read the instruction
book carefully.
WARNING: The charger and battery pack are
specifically designed to work together so do
Plug the charger into an appropriate outlet.
Slide one or two battery packs into the charger.
Normally, the relevant charge indicator light (3) will
flash in green color showing the battery is being
charged.
WARNING: When battery charge runs out
after continuous use or exposure to direct
Light
ON/ Flash
Defective Battery
Battery Temperature Protec-
tion
- - - - -
The temperature of battery
pack is less than 0
than 45
Status
o
C or more
o
C.
EN

Publicidad

loading