Publicidad
Idiomas disponibles
Idiomas disponibles
Changing the CR2032 Battery
To change the battery of your thermometer, use a coin to turn the battery door
counterclockwise to align the triangle on the battery door with the raised dot on the side of
the thermometer housing. Remove the old battery and insert the new battery with the positive
terminal facing up. Place the battery door over the battery compartment aligning the triangle
with the raised dot on the side of the thermometer. Press down and turn the battery door
clockwise until the triangle is aligned with the dot directly below the battery compartment.
Safe Use and Care
• Do Not submerge the thermometer in liquid as the thermometer is not waterproof.
• Do Not submerge the area where the probe meets the thermometer housing in liquid as
it is not waterproof.
• Do Not store in high heat environments or near anything that generates heat. Store in a
cool, dry place.
• Do Not use solvents to clean the thermometer, probe, or included accessories. Use
soap and water on a damp sponge or cloth.
• Do Not subject the thermometer to excessive force, shock, dust, temperature, or
humidity. Doing so may result in malfunction, shorter lifespan, and/or damage to the unit.
• Keep the probe away from direct heat and do not allow it to come into contact with an
open flame or come into direct contact with the cooktop burner.
• Keep thermometer and battery out of the reach of children.
Clean probe in between uses.
Do not leave the thermometer in an oven or grill or use in a microwave.
Warning Messages and Indicators
• LLL – the object being measured is below the temperature range of the thermometer.
• HHH – the object being measured is above temperature the range of the thermometer.
• LO – indicates that the batteries are low and need to be changed.
4
Publicidad
