Setup Menu and Functions
keys to change the setting, pressing OK button to save.
Photo stamp
Select ON to print the temperature, moon phase, date, and time on each
photo (only for photos). Select OFF for no imprint.
Password protection
Select "On" if you want to use a password to protect the camera from
unwanted access. You can set a 4-digit combination. Once the code is
set, the camera will prompt you to enter the correct code.If you have
forgotten your password, please contact our official email to get the file
to reset the camera.
support@coolife.site
Official email:
Beep sound
Open / close key tone.
Options:【ON】/【OFF】
Format memory card
Delete (erase) all files stored on a card to prepare it for reuse. Always
format a card that has been previously used in other devices.
Caution!Make sure you have downloaded and backed up any files
you want to preserve first! Press OK to execute, press MENU to exit
without formatting.
Serial NO.
Select "On" if you want to use a serial number to rank the camera. You
can set a 4-digit combination. This helps multicamera users identify the
location when reviewing the photos, since each camera will imprint its
number on all photos it captures.
25