Publicidad
Preparing the Camera
camera. The power
connector is a 3.5x1.35 mm coaxial DC power plug with positive 'tip'
(inside pin) polarity. Leave internal batteries in the camera during use.
Note:
■ Rechargeable batteries cannot be recharged in the camera using an
external power supply.
■ It is not recommended to use a universal external power adapter, if
the voltage is adjusted to inaccurate, you risk to burn the camera.
■ When using an external power source, please leave four or eight new
batteries( Avoid External Power Suspension).
2.5. Assembly with strap
Use the securing strap supplied to attach the Wildlife Camera to a tree
or another object. The illustrations below demonstrate how to fasten
the securing strap.
Position the Wildlife Camera as desired and pull the loose end of the
securing strap tight until the camera is firmly secured. To release the
securing strap again, pull at the tab of the securing strap.
12
Publicidad
