claber meteo 8323 Manual De Instrucciones página 39

Fitting the batteries
• Reposition the battery holder in the housing
• Retighten the cap, checking that the seal is positioned correctly in its
➏
seat .
• Reposition the control unit as indicated and refit the transparent cover,
checking that the seal is correctly seated in its groove
Once the batteries are fitted, an initialization routine will take place
(display Leds light up in sequence, valves close in sequence).
30 seconds after having fitted the batteries, or pressed any of
the buttons, the Leds on the panel will go out: to refresh the
display, press any button.
Notes:
• Use only AAA type 1.5 V (LR03) alkaline batteries, and replace them at
the beginning of each season.
• The current programming remains stored while the batteries are being
replaced, for a maximum duration of 30 seconds approx.
2
5
6
3
➎
.
➐
.
7
UK UK
4
A
A A
n e
a l i
A l k
V
1 , 5
pic.7
39 39