claber meteo 8323 Manual De Instrucciones página 48

Diagnostics
UK
PROBLEM
Watering
times different to those
programmed with the
remote control.
NO watering at all
The solenoid valve does
not recognize the RF
Rain Sensor.
48 48
SOLUTIONS
occurs at Check the status of the clock symbol
on the display of the solenoid valve: if the
symbol is green and blinking, this means
that the remote control and the solenoid
valve times are NOT synchronized.
Perform the synchronisation procedure
with
Chap."synchronization of time with the
remote control" on page 41).
1) There are no programmes set (clock symbol
2) The solenoid valve and the remote control
3) The batteries of the solenoid valve are:
4) The RF Rain Sensor (if installed) has cut in.
See "Diagnostics" of the RF Rain Sensor
manual.
the remote
of the solenoid valve alternating red/
green). See "Programming" of the remote
control manual.
are not connected (clock symbol
solenoid valve red, permanently alight).
See "Connections" on page 42.
flat, incorrectly installed or of the wrong
type.
control (see
of the