Trevi RC 853 D Manual Del Usuario página 8

RC 853 D
DISPLAY BRIGHTNESS
When the radio is off and the current time showing, press and hold
down "SNOOZE DIM/SLEEP" button (3) for 2 seconds to change
the brightness of the display between high and low.
Note: Do not change the display brightness while setting the clock
radio and when the alarm is on.
RADIO OPERATIONS
General Operations
1. Press and hold down "
and off. The radio station frequency will appear on the display;
2. Press "TUN-/HOUR AL1" button (2) or "AL2 TUN+/MIN"
button (4) to change radio frequency, or press and hold down
"TUN-/HOUR AL1" button (2) or "AL2 TUN+/MIN" button (4)
for approximately 3 seconds to auto scan for the next available
station;
3. Turn "VOLUME" dial (9) to adjust volume level;
4. Radio will show the time in a few seconds after changing fre-
quency. Press "TUN-/HOUR AL.1" button (2) or "AL2 TUN+/
MIN" button (4) to view radio frequency.
Pre-set Station Memory
1. The radio can store up to 10 FM stations.
2. To store a station in memory, tune to the desired radio station.
Press and hold down "MEM/TIME SET" button (1) and a number
starting with "P" on the display will flash. This "P" number
represent one of the ten memory stations. Press "TUN-/HOUR
AL1" button (2) or "AL2 TUN+/MIN" button (4) to change the
station number. Press "MEM/TIME SET" button (1) to confirm.
3. To recall a pre-set station, turn the radio on. Press "MEM/TIME
SET" button (1) repeatedly until station number is found. The
station frequency will be display momentarily.
SLEEP MODE
Press the SNOOZE DIM/SLEEP button (3) to program the radio to
turn off automatically for up to 90 minutes.
Set the switch-off time by pressing the SNOOZE DIM/SLEEP but-
ton (3) repeatedly; initially the maximum time of 90 minutes will
be shown, by pressing the button several times the time will be
lowered in steps of 10 minutes until the word OFF appears (SLEEP
function deactivated).
When the SLEEP function is activated, the Sleep indicator (6)
will light up.
8
FM ALARM CLOCK
AL.OFF" button (5) to turn radio on
SPECIFICATIONS
Power Source:
..........................................................
Back-up Batteries:
........................................
Frequency Range:
......................................................
Dimensions:
............................................................
Power Consumption:
....................................................................
Weight:
.........................................................................................
PRECAUTIONS FOR CORRECT DISPOSAL OF THE
PRODUCT.
The symbol shown on the equipment indicates that waste must be
disposed of in "separate collection" and so the product must not
be disposed of together with urban waste.
The user must take the product to special "separate waste collection
centres" provided by local government, or deliver it to the retailer
against the purchase of a new product.
Separate collection of waste and subsequent treatment, recycling
and disposal operations promotes the production of equipment
with recycled materials and limits negative effects on the environment
and on health caused by improper handling of waste.
Illegal disposal of the product leads to the enforcement of admi-
nistrative penalties.
ENGLISH
230V 50Hz
2 batteries "AAA" 1.5V
87.5-108MHz
190*83*65 mm
2W
343g