2.2
Operator duties
Before commissioning
Check the product for damage.
Permanent duties
The following are permanent duties for you as the operator:
Implement national regulations on work safety, accident prevention, disposal and
environmental protection.
Implement all other national rules and regulations.
Carry out a risk assessment.
Prevent incorrect use.
Everyone who works with the product must use suitable protective equipment.
Everyone who works with the product must be qualified for his/her area of
responsibility.
Train workers at least twice a year in order to keep safety and hazard knowledge up
to date.
Assign clear responsibilities to employees (e.g. operation, maintenance, repair).
Have damage repaired promptly and professionally.
Only use accessories approved by DENIOS and original replacement parts.
268041_DCS_Operating-
10 / 28
instr_001_en.docx
Safety notices