USER GUIDE
ASSEMBLY INSTRUCTIONS
STEP 12:
Fix the 2 Drawer Handles (S1) to the Drawer
Front (M) by inserting 8 Small Nuts/Bolts (X)
from the outside in towards the ledge. Tighten
to secure.
STEP 13:
Fix the Short Drawer Sides (O) to the Drawer
Front (M) using 4 Short Fixings (V). Tighten to
secure.
STEP 14:
Lower the Drawer Base (P) into the Drawer
Assembly to rest on the inner ledges. Fix the
Long Drawer Back (N) to the assembly using 4
Short Fixings (V).
STEP 15:
Fix the 2 Drawer Runners (U) to the Short
Drawer Sides (O) using 4 Small Nuts/Bolts
(X) though the available holes as illustrated.
Tighten to secure.
STEP 16:
Holding the drawer within the Workbench
assembly, extend and align the Drawer
Runners (U) with the fixing holes in the
Drawer Supports (D, E). Insert 4 Small
Fixings (X) through the Runners and into the
Supports. Tighten to secure.
Insert the Drawer Support (S4) into the centre
of the drawer and secure in place using (W).
10