Monster Group WORKBENCH WITH DRAWER Manual De Instrucciones página 6

USER GUIDE
ASSEMBLY INSTRUCTIONS
In order to allow room for the tabs to fit securely, it is recommended that you gently prise
the tabs open using a suitable flat head screwdriver (not supplied). Once the tabs have
been inserted, gently tap shut using a suitable rubber mallet to secure.
STEP 1:
Clip the 4 Cap Feet (S3) onto the ends of
the Legs (A, B, C) as illustrated.
06
STEP 2:
Fit the Drawer Supports (D, E) between the
Front and Back Legs (A, B, C) and secure as
illustrated.
The Drawer Supports should be fitted
between the 3rd and 4th slots and face
outwards.
STEP 3:
Fit the 4 Worktop Supports (F) to the Front
and Back Legs (A, B, C) as illustrated.
The Short Worktop Supports should be
positioned between the 1st/2nd and 5th/6th
slots.