Black and Decker IR02V Manual De Uso Y Cuidado página 7

CL E ANI NG AN D CA RE
This product contains no user serviceable parts. Refer to qualified service
personnel.
CLEANING OUTSIDE SURFACES
1. Make sure the iron is unplugged and has completely cooled.
2. Wipe the soleplate and outer surface with a soft, damp cloth. Water
and small amounts of gentle household soaps, such as dishwashing
liquid, can be used. Never use heavy-duty cleaners, vinegar or
abrasive scouring pads that may scratch or discolor the iron.
3. After the iron has been thoroughly dried, turn the iron back on and
lightly steam over an old cloth. This will help remove any reside left
in the steam holes.
4. When finished cleaning, turn iron off and allow time to cool before storing.
STORING YOUR IRON
1. Check that the iron is on the MIN setting, unplugged
and completely cool.
2. Empty the water tank by opening the water fill door
and turning the iron upside down over a sink.
3. Wrap the cord loosely around the heel of the iron
and use the clip on the plug to clip the end of the
cord to the wrapped cord. (B)
4. Always store the iron vertically on its heel to prevent water leaking
from the soleplate.
7
B