Storage
•
Store the product in its original packaging in a dry area. Keep away
from children and pets.
Maintenance
•
Any other servicing than mentioned in this manual should be
performed by a professional repair centre.
Troubleshooting
Problem
The product does not switch
on.
The product does not cool
efficiently.
Ice forms on the product.
The product is noisy and
vibrates abnormally.
Solution
•
Check if the power plug is
connected to the power outlet.
Check if the power outlet works.
•
Plug's Leakage Current Detection
and Interruption device tripped.
Press the RESET button (P).
•
The circuit breaker of the electrical
installation tripped. Flip the suspect
breaker to the "on" position.
•
Clean the removable air filter.
•
Check the air vents for
obstructions.
•
Adjust the airflow direction.
•
Ensure the doors and windows are
closed.
•
Compressor has shut off due to
changed operating mode. After
switching off the product, wait at
least 3 minutes before switching it
on again.
•
Clean the removable air filter.
•
Set to the fan mode to remove the
ice. Decrease the set temperature
to stop ice from forming.
•
Incorrect installation. Refer to
installation instructions.
•
Clean the removable air filter.
EN
23