Publicidad
Idiomas disponibles
Idiomas disponibles
EN
24
Problem
The product turns on and off
rapidly.
Water drips inside when the
product is on.
Water drips outside when the
product is on.
The product does not
respond to the remote
control.
The main unit display shows
an error code.
Error Code
Error Code
AS
ES
HS
CS
OS
E7
Solution
•
Outside temperature is extremely
hot. Set fan speed to a higher
setting.
•
Clean the removable air filter.
•
Incorrect installation. Refer to
installation instructions.
•
This is normal during excessively
humid days. The product is
removing large quantity of moisture
from the humid room.
•
Operate the remote control within
26 ft (8 m) from the product.
•
Point the remote control directly
towards the product when
operating.
•
Unplug the product from the power
supply, and then connect it again.
•
Refer to the table below for the
details of the code.
Meaning
Room temperature sensor error.
Evaporator temperature sensor error.
Electric heating sensor error.
Condenser temperature sensor error.
Outside temperature sensor error.
Unit malfunction.
Publicidad
