Monarch Industries Black lynx 636004 Manual Del Usuario página 6

1D) Refer to Figure 2
Assemble wheels (H) to mixer frame using
2 shoulder bolts (HH), 2 M10 plain
washers (GG) and 2 M10 flange nuts (FF).
TIGHTEN WHEEL BOLTS.
Tighten all fasteners from steps 1A
through 1D.
2. Mixer Handle
Refer to Figure 3
Insert U-Bolt (JJ) into handle (G). Attach 2
M8 flange nuts (AA) to U-Bolt. Slide handle
with U-Bolt onto pivot pin (D)
DO NOT TIGHTEN!
3. Drum Support Assembly
Refer to Figure 4
Insert U-Bolt into drum support assembly
(I). Attach 2 M8 flange nuts (AA) to U-Bolt.
Slide drum assembly (I) onto pivot pin (D).
Attach drum assembly (I) to handle (G)
using the M8 X 40mm bolt (DD) and an M8
flange nut (AA).
DO NOT TIGHTEN!
6
FIGURE 2
FIGURE 3
FIGURE 4