Monarch Industries Black lynx 636004 Manual Del Usuario página 7

4. Motor Assembly
Refer to Figure 5
Remove M6 nuts (OO), M6 spring washers
(NN) and M6 plain washers (MM) from
motor. Attach motor (K) to handle (G) and
drum support assembly (I) using previously
removed fasteners. Tighten nuts in cross
pattern.
TIGHTEN ALL FASTENERS FROM
STEPS 2, AND 3.
5. Drum Assembly
5A) Refer to Figure 6
Slide drum assembly (A) onto motor shaft.
Secure with shaft pin (KK) and cotter pin
(LL). Rotate drum for easier access to
cotter pin. Bend end of cotter pin up to
secure it.
5B) Refer to Figure 6
Slide handle grip (J) onto end of handle
(G). A soap/water solution may be used as
a lubricant if required
7
FIGURE 5
FIGURE 6