Publicidad
Idiomas disponibles
Idiomas disponibles
EN
START
LED Statements
Off: No/low solar panel voltage
Green Fix: low Charging current
Slow green flashing: normal charge
Slow green flashing: 100% Charge
Green fix : charge > 80%
Orange : charge between 50 to 80%
Red : Discharged battery < 50%
Orange: DC output switched ON
Off: DC output switched OFF
Note: the screen backlight is active during 60 seconds after last pressure on one of the 5 buttons.
24
Temperature sensor input : local
Refer to page 39.
Solar panel connection
Battery connection 12 or 24V
12 or 24V DC load output connection
RS485 communication port
LCD interface for system statement and parameters
setting
button for Direct access to Solar data
button for Direct access to Battery data
button for Direct access to DC output data
(Only if DC ouput mode is validated)
1 - Press button to browse all data
2 - Press 5 s to enter in parameters mode
1 - In parameter mode, press to
2 - press 5 seconds to reset historical
consumption.
3 - Press button to switch ON / OFF DC
ouput
www.uniteck.fr
validate selection
(Only if DC ouput mode is validated)
Publicidad
