EAS ELECTRIC ECR05B Manual De Instrucciones página 47

Operating the Remote Controller
2) Press
according to the order shown in Figure 3.5;
Auto
3) In Auto, Cool, Dry or Heat mode, press
the temperature setting. Press
temperature by 1°C (default). Long press to change the
temperature continuously.
Note: Fan speed cannot be adjusted in the Auto and Dry
modes. Temperature setting cannot be adjusted in the Fan
mode. No Auto Mode by default, see initial settings for how to
set the Auto mode
5.3 Fan Speed Operations
1) 7 fan speeds: The default in the remote controller is the
mode with 7 fan speeds, where the Fan Speed will be
adjusted in turn as shown in Figure 3.7;
Auto
Auto
Speed 1
2) 3 fan speeds: Fan Speed will be adjusted in turn as shown
in Figure 3.8.
Note: the default fan speed is 7 fan speeds, please refer to
Field Setting to adjust the default fan speed. Fan speeds
cannot be adjusted in Dry mode and Auto Mode.
each time to change the operating mode
Cool
Speed 2
Speed 3
Auto
Auto
Heat
Figure 3.5
and
Figure 3.6
Speed 4
Speed 5
Figure 3.7
Low Mid
Figure 3.8
13
Dry Fan
and
to adjust the
Speed 6
High
to adjust
High
Speed 7