Publicidad
Idiomas disponibles
Idiomas disponibles
Operating the Remote Controller
5.8 ECO Operations
The remote controller can send the ECO signal to the indoor
unit when the unit is operating in Cool or Heat mode.
1) Press
indoor unit. The
2) Then press
icon disappears.
Note:
• In cooling mode, when ECO is set up, the Fan Speed is
turned to Auto and the temperature is 26°C; in heating
mode, when ECO is set up, the Fan Speed is turned to Auto
and the temperature does not change.
• Once it has been running for 8 hours,
light up, and the unit will exit the ECO mode.
• The Silent and ECO functions cannot be implemented at
the same time.
5.9 Timer On/Off Operations
"Timer" is used to set the timed on/off state of indoor unit.
1) Timer On Operation:
① Press
display "Timer On", and "0.0h Later On" will appear in the
timer area. Adjust the Timer On settings now;
(see Figure 3.13) to send the ECO signal to the
icon is displayed;
,
or
Figure 3.13
(see Figure 3.14), and the remote controller will
Figure 3.14
to exit the ECO function. The
16
will no longer
Publicidad
