EAS ELECTRIC ECR05B Manual De Instrucciones página 49

Operating the Remote Controller
5.6 IDU Display Operations
The Display function is used to control the on/off state of the
display in the indoor unit.
1) When the remote controller is in on or off state, press
Figure 3.11), and the display of the indoor unit lights up;
2) When the display of the indoor unit lights up, press
to turn off the light.
5.7 Silent Mode Operations
The Silent function is used by the remote controller to send
the "Silent" signal to the indoor unit. The indoor unit
automatically optimizes the noise it generates when it is in
the "Silent" mode.
1) When the unit is in the Cool or Heat mode, press
Figure 3.12) to start the Silent function. Screen displays the
icon;
2) In Silent mode, press
and the icon will disappear.
Note:
• Once it has been running for 8 hours,
up, and the unit will exit the Silent mode.
• The Silent and ECO functions cannot be implemented at the
same time.
Figure 3.11
Figure 3.12
to turn off the Silent function,
15
will no longer light
(see
(see