Publicidad
Idiomas disponibles
Idiomas disponibles
EN
The jack does
not reach the
maximum height.
The jack does not
reach the minimum
height.
After each maintenance or repair, the markings must be checked to ensure
that they are identical to the original markings.
USE ONLY AS A WHEEL CHOCK
The product is not intended to be fixed to the ground, but only usable
to block the car when it is stationary and on a flat surface.
TECHNICAL DATA
Designation:
Min. support height: 278 mm, Max. support height: 415 mm, Net
INTENDED USE
This product is an axle stand for supporting motor vehicles. It is purely
a support device. Using the device for other purposes is not permitted.
Liability for all damages/injuries caused by improper use shall be borne by
the user of the device, and not by the manufacturer/dealer.
USE
1 For your safety, read the
instruction manual before
first use.
2 Insert the saddle completely
into the axle stand and lock
it in place by turning the
lever.
3 Wedge
the
54
The oil level is too low. Arrange for the jack to be
inspected by a technician. When filling oil, both the
properties of the hydraulic fluid and the quantity
must be observed.
The hydraulic system is dirty. Arrange for the jack
to be inspected by a technician.
The return spring is worn or out of position.
Grease and clean all moving parts of the lifting
mechanism regularly or arrange for the jack to
inspected by a technician.
Rack and pinions rated load : max. 2 tonnes
weight: 5.4 kg/pair
remaining
Publicidad
