Airzone Easyzone ZS6 Manual Del Usuario página 10

Settings menu
Local ventilation. This option enables the activation
in the selected zone when the system is not actively cooling or heating any of the zones.
Important: In Heat Pump installations, it is recommended not to activate the global and
local ventilation in an Airzone system connected to the master indoor unit. It may cause
EN
the Stop user mode to turn off the rest of the Airzone system.
Timer. It is an auto power-off timer of the zone:
Off. Timer is not activated.
30. Thirty minutes after its activation, the zone will turn off.
60. Sixty minutes after its activation, the zone will turn off.
90. Ninety minutes after its activation, the zone will turn off.
Information. This parameter provides information on:
•
Zone: firmware, zone, association, actuator or status of the communications.
•
System: firmware, settings and information about the system controllers.
•
Devices: It displays the elements connected to the system.
Zone navigation. This parameter is only available when there is an error with the master
Blueface zero thermostat. Access and modify the set point temperature, mode, user mode and
flow rate parameters via the "all zones" option.
10
or deactivation of the ventilation