5.
Switch off the appliance and disconnect from
supply before changing accessories or approaching parts
that move in use.
6.
Care shall be taken when handling the sharp
cutting blades, emptying the bowl and during cleaning.
7.
Don't plug the appliance into the power supply
until it is fully assembled and always unplug before
disassembling the appliance or handle the blade.
8.
Don't let the motor unit, cord, or plug get wet.
9.
Never use a damaged appliance. If it has been
damaged, please get it to approved service center,
checked or repaired.
10.
If the supply cord is damaged, it must be
replaced by approved service center.
11.
Don't let excess cord hang over the edge of
the table or worktop or touch hot surface.
12.
The blades are very sharp!
13.
Don't place the appliance in the hot
ingredients.
14.
The appliance is constructed to process
normal household quantities.
15.
Neither the measuring beaker, nor the
chopping bowl is microwave proof.
16.
Short-time operating. Use the appliance
according to the table of Processing Guide.
17.
If you want to operate the unit for more than
one cycle, you should wait at least 3 minutes before the
next working.