Concept VP4114 Manual De Instrucciones página 24

• Turn the unit off and let it cool down before maintenance and after use.
• Prior to vacuuming, it is necessary to remove large or sharp objects which could damage a fi lter of the
vacuum cleaner from the surface to be cleaned.
• Do not use the unit if the fi lters are fouled.
EN
• Do not discard the accumulator of the unit into the fi re or expose it to temperatures above 40 °C.
• Do not touch the driven moving parts while the unit is in operation.
• Do not repair the appliance yourself. Contact an authorized service center.
• This appliance may be used by children 8 years of age and older and by persons with physical or mental
impairments or by inexperienced persons if they are properly supervised or have been informed about
how to use of the product in a safe manner and understand the potential dangers.
Children must not play with the appliance. This appliance may be cleaned by children
8 years of age and older if they are properly supervised. Keep this appliance and the
power cord out of reach of children younger than 8 years of age.
Failure to follow the manufacturer's instructions may lead to
refusal of warranty repair.
PRODUCT DESCRIPTION
1 Stick part holder
2 Stick part
3 Stick part switch
4
Portable part with a motor
5
Dust receptacle with cyclone unit
6 Charging indicator
7 Portable part switch
8 Turbo brush
9 Fi lter with non woven fabric
10 F i lter with nylon
11 Engine part
12 A ccumulator
13 Speed up button
Accessories
A Charging adapter with charging base
B Nozzle for upholstery
C Charging adapter with accumulator charger
5 1 0 9
B
38
46
C
7
6
1 3
A
11 12
OPERATING INSTRUCTIONS
ASSEMBLING THE VACUUM CLEANER
1 NOTE:
Always disconnect the plug of the charging adapter from the mains outlet prior to mounting or removing
accessories!
3
1. Inserting the portable part of the vacuum cleaner
Insert the nozzle of the portable part into the stick part of the vacuum cleaner and push the portable
part holder until you hear a clicking sound – which indicates that the correct position has been reached
(Fig. 1). To release the portable part press releasing button on the stick part of the vacuum cleaner
simultaneously.
2
2. Erecting the holder of the vacuum cleaner stick part
Tilt out the holder of the vacuum cleaner stick part until you hear a clicking sound – which indicates that
the correct position has been reached (Fig. 2).
To fold press the releasing button on the holder of the vacuum cleaner stick part.
3. Mounting the turbo brush
Put the turbo brush on the lower end of the vacuum cleaner stick part until you hear a clicking sound –
which indicates that the correct position has been reached (Fig. 3).
To dismount the turbo brush press the releasing button on the lower end of the vacuum cleaner stick
part.
4
8
Fig . 1
VP 411 5
CHARGING THE ACCUMULATOR
Prior to the first use or if the accumulator of the vacuum cleaner is fully discharged, let the vacuum cleaner
charge for approximately 4 hours.
Connect the power cord and plug the charging adapter into the wall outlet.
If you want to keep the service life of the accumulator as long as possible, charge it only after it has been
discharged completely.
The service life of the accumulator is approximately 300 charging cycles.
Note: The indicator light will flash once the device has made contact with the adaptor. The light will stay on
once it is full charged.
VP4114 VP 411 5 VP4114
EN
EN
Fig. 3
F ig . 2
47 39