Descargar Imprimir esta página

Signature Kitchen Suite SKSFD4826P Manual De Instalación página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

en-us_main.book.book Page 4 Monday, January 16, 2023 5:19 PM
4
IMPORTANT SAFETY INSTRUCTIONS
• Do not install the refrigerator in a damp location or where it will be exposed to running water.
Deterioration of the insulation on electrical parts may result, causing risk of electric shock.
• Connect to potable water only. Non-potable water can cause health risks.
Electrical Connection
• If connected to a circuit protected by fuses, use time delay fuse.
• Use a dedicated outlet.
- Plugging several devices into one outlet may cause a fire.
• Plug in the power plug with the power cord facing downward.
- Failure to do so could damage the plug or cord, resulting in fire or electric shock.
• When installing or moving the refrigerator, be careful not to roll over or damage the power cord.
Do not squeeze or crush the cord or plug when pushing the refrigerator in.
- Doing so could result in fire or electric shock.
• Do not allow the power cord to be bent, crushed, or damaged. Do not run the power cord under
heavy objects like furniture, other appliances, or through high-traffic areas.
- Doing so may damage the power cord and result in fire or electric shock.
• Do not extend or modify the length of the power cord.
- Use only an exact factory replacement part to avoid electrical issues, fire, or electric shock.
• Turn off the power before cleaning or moving the refrigerator.
- Failure to do so may cause electric shock or injury.
- Press the POWER button for 3 seconds to turn off the power at the display panel.
• Do not pull out the cord or touch the power plug with wet hands.
- Doing so may cause electric shock or injury.
• Remove water or dust from the power plug and insert it securely into the wall socket.
- Dust, water, or a loose connection may cause a fire or electric shock.
• Do not unplug the refrigerator by pulling on the cord.
- Doing so may cause an electric shock or a short circuit resulting in a fire.
• Do not use the power cord or the power plug if it is damaged or if the outlet is damaged.
- Doing so may cause an electric shock or a short circuit resulting in a fire.
• Wait for 5 minutes or longer when reconnecting the plug or turning the power back on.
- Give the compressor time to cycle before restarting.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
CAUTION
• Do not stick your hands under the refrigerator.
- Sharp edges, fans, and wires may cause an injury.
• Save these instructions for the local inspector's use.
• Observe all governing codes and ordinances.
• Installer: Leave these instructions with the consumer.
• Consumer: Keep these instructions with the owner's manual for future reference.

Publicidad

loading