Johnson JCRL120P2 Manual De Usuario página 47

3. INSTALLATION METHOD
3.Wiring figure
Mainboard
4-core shielding wire Connection cable
CN40
Fig 3-3
Connect the female joint of the wires group from the

mainboard with the male joint of the connective wires
group. (See Fig.3-3)
Connect the other side of the connective wires group

with the male joint of the wires group leads from the wire
controller. (See Fig.3-3)
 Install the Adapter Board and the Display Board on the
High Wall (See the Appendix for instructions).
7 V.1