Erbauer ETBV18-Li Manual De Instrucciones página 24

After use
1. Switch the product off, remove the battery pack and let it cool down.
2. Disconnect the accessories if necessary.
3. Check, clean and store the product as described below.
WARNING! Always switch the product off, remove the battery and let
the product cool down before performing inspection, maintenance sand
cleaning work!
1. Keep the product clean. Remove debris from it after each use and before storage.
2. Regular and proper cleaning will help ensure safe use and prolong the life of the
product.
3. Inspect the product before each use for worn and damaged parts. Do not operate
it if you find broken and worn parts.
WARNING! Only perform repairs and maintenance work according to
these instructions! All further works must be performed by a qualified
specialist!
Clean
1. Clean the product with a slightly damp cloth and mild soap. Use a brush for areas
that are hard to reach.
2. Check for any damage and wear. Repair damages in accordance with this
instruction manual or take it to an authorised service centre before using the
product again.
24
MNL_ERBAUER_18 V vacuum cleaner_ETBV18-Li_IMGB_V1_220127.indd 24
Care & maintenance
1/27/22 3:45 PM