Stahlwille MANOSKOP 730D Puesta En Marcha página 18

Basic safety instructions
Proper use
The MANOSKOP® 730D electromechanical torque wrench
serves to measure torques during the controlled tightening and
loosening of threaded connections in the workshop sector. To do
this, an appropriate socket tool must be connected to the torque
wrench.
Load can also be placed on the MANOSKOP® 730D torque wrench
counter to its functional direction.
The maximum permissible nominal torque of the torque wrench
must never be exceeded. Proper use includes complying with the
information contained in these operating instructions in full. In
particular, also comply with and follow the safety instructions
and the technical limit values. The relevant accident prevention
regulations of the responsible employer's liability insurance
association and all further applicable safety regulations must also
be observed. The MANOSKOP® 730D electromechanical torque
wrench must only be used for the specified purposes.
STAHLWILLE accepts no liability for damage which occurs as a
result of improper use. In particular, improper use includes
• the uncontrolled loosening of seized, e.g. rusted,
threaded connections
• use as a crowbar
• use as an impact tool.