Stahlwille MANOSKOP 730D Puesta En Marcha página 29

• To work with a bolting tolerance,
use the arrow buttons to select "On"
• Press the F button.
• Use the arrow buttons to set
the lower tolerance range
• Press the F button.
• Use the arrow buttons to set
the lower tolerance range
• Press the F button.
• In order to save the bolting data,
use the arrow buttons to select "On"
• Press the F button.
The first digit of the four-digit bolting application number flashes.
• Use the arrow buttons to select the first digit.
• Press the F button.
The second digit of the four-digit
bolting application number flashes.
• To set the remaining digits of
the bolting application number,
proceed as described above
• Press the F button.
• To work with extension correction,
use the arrow buttons to select "On"
• Press the F button.
• Use the arrow buttons to set the extension
• To accept the setting and return to
the basic status, press the OK button
EN
29